Super abrasive materials for every bond system.
Five families of synthetic diamond, from coarse saw grit and micron powders to CVD diamond, PDC cutters and single crystal diamond.
Saw Grade Synthetic Diamond
Grown diamond from 30/35 to 325/400 mesh for sawing, grinding, lapping and core drilling of stone, glass, concrete, ceramics and tungsten carbide.
Polycrystalline CVD Diamond
Pure polycrystalline diamond grown by DC arc plasma jet and hot-filament CVD for dressing tools, cutting tools, wear parts and heat spreaders.
CDACDA Mechanical Grade CVD DiamondLight yellow-green, translucent DC arc plasma jet CVD diamond with the highest wear resistance in the range.
CDXCDX Mechanical Grade CVD DiamondBlack, opaque hot-filament CVD diamond for applications where high wear resistance is required.
CDPCDP Mechanical Grade CVD DiamondCost-effective DC arc plasma jet CVD diamond with a wear resistance ratio below CDA.
Grinding Grade Synthetic Diamond
Resin and metal bond diamond and micron powders for grinding, lapping and polishing of tungsten carbide, glass and ceramics.
PDC & PCD
Polycrystalline diamond compacts for geological, oil and gas drilling, and PCD blanks for cutting tools.
Single Crystal Diamond
HPHT single crystal diamond for high precision cutting tools, dressers, wear parts and wire drawing dies.
SCD-BSCD-B Single Crystal Diamond{100}-oriented HPHT single crystal plates from 3×3 to 6×6 mm in three grades by right-angle count.
SCD-BLSCD-BL Laser-Cut Single Crystal DiamondSCD-B plates laser-cut to customer edges and angles, mainly for cutting tools and dressing tools.
SCD-WDSCD-WD Single Crystal Diamond for Wire Drawing Dies{111}-oriented single crystal diamond, 0.5 to 2 mm thick, for drawing ferrous, non-ferrous and precious metal wire.
Not simply a supplier of super abrasives. A participant in your project.
Jike aims to help clients select the appropriate super abrasives material for their tools used in grinding, drilling, lapping and polishing, and to provide the most stable products.