SCD-BL Laser-Cut Single Crystal Diamond
SCD-B plates laser-cut to customer edges and angles, mainly for cutting tools and dressing tools.
Overview
Single crystal diamond (SCD) series are synthetic diamonds made by HPHT (high pressure high temperature) synthesis. To ensure size and stability of physical properties, longer growth times and more extreme conditions are required compared with saw grade synthetic diamond.
SCD series products are the best choice for high precision cutting tools processing nonferrous metals and non-metallic materials, high precision dressers for wheel dressing, wear parts and wire drawing dies.
The SCD-BL series, oriented on the crystallographic {100} plane, is based on the SCD-B series and cut into specific edges and angles by high precision laser cutting as per the customer's requirement. It is mainly used for cutting tools and dressing tools.
Very low impurity, good transparency and golden-yellow colour, laser cut with a majority of full right angles. Besides sizes similar to SCD-B, the sizes used for dressing tools are listed below.
Dressing tool sizes (mm)
- 4.0 × 1.0 × 1.0
- 3.0 × 1.0 × 1.0
- 5.0 × 0.8 × 0.8
- 4.0 × 0.8 × 0.8
- 3.0 × 0.8 × 0.8
- 5.0 × 0.6 × 0.6
- 4.0 × 0.6 × 0.6
- 3.0 × 0.6 × 0.6
More in Single Crystal Diamond
- SCD-BSCD-B Single Crystal Diamond{100}-oriented HPHT single crystal plates from 3×3 to 6×6 mm in three grades by right-angle count.
- SCD-WDSCD-WD Single Crystal Diamond for Wire Drawing Dies{111}-oriented single crystal diamond, 0.5 to 2 mm thick, for drawing ferrous, non-ferrous and precious metal wire.
Not simply a supplier of super abrasives. A participant in your project.
Jike aims to help clients select the appropriate super abrasives material for their tools used in grinding, drilling, lapping and polishing, and to provide the most stable products.